Welcome to Jiayuanda's Google website www.jydultrasonic com / www.weldultrasonic. com / www.jydultrasonicmachine. Www. jiayuanda technology is a professional ultrasonic manufacturer specializing in the development of ultrasonic technology and equipment, with more than 13 years of experience. It can provide customers around the world with various ultrasonic welding solutions, ultrasonic cutting solutions, ultrasonic extraction solutions, ultrasonic screening solutions and ultrasonic cleaning solutions

We provide customers around the world with hand-held portable ultrasonic cutting knives, which are very convenient for food cutting/rubber cutting/cloth cutting and plastic cutting. We also have full-automatic ultrasonic cutting equipment

About our manual and automatic 20Kz cutting knife and 20Khz cutting system are equipped with a generator+cutting blade, which is particularly suitable for round bread, cake, pizza and bakery factories or stores

Case 1: Scheme of ultrasonic cutting Swiss roll

Today, a customer reported that the Swiss coil was damaged when cutting it. The amplitude has been adjusted to 100%, but the power is not enough

Our project immediately gave a professional reply:

1. Ask the customer if there is a layer of crispy on the surface of the Swiss roll

2. Swiss rolls like this are very easy to cut. It only needs 65% amplitude to cut well, and there is no need to increase it. If it is not good to cut at 100%, either the cake cannot be cut or the ultrasonic wave is damaged.

3. Also, the customer should pay attention to whether there is a sound wave when lifting the blade

Case 2: Ultrasonic cheese cutting scheme

Enquiries from our Singapore food equipment suppliers:

We need a one-stop solution and look for an ultrasonic machine to cut cheese into smaller cubes for further processing. There are 3 types of cheese in the following sizes:

Cheddar cheese 390x300x190mm

Cheese block 370x270x110mm

Massurila cheese piece 390x300x85mm,

We don't need to cut accurately, we need to reduce the size to about 100mm cubes, and use these cubes

Cut into 4x2x100mm cutting wires (strips) in another cutting machine.

We want to manually place the whole piece on your machine and cut it with an ultrasonic blade (3 cuts on 390)

Our professional engineer team answers as follows:

Our products are suitable for cheese cutting, but we haven't developed fully automatic food cutting equipment with manipulator operation yet, so this customer in Singapore is our potential customer.

Case 3: Scheme of ultrasonic cutting protein bar

Can our cutter cut the protein stick? It is a very sticky material. (See the figure below)

The engineer replied that our 20Khz ultrasonic cutting equipment had no problem cutting this protein stick

If you have more other ultrasonic cutting solutions to solve, please feel free to contact us

Website: www.jydultirasonic com www.weldultrasonic.com

Email: sales@jydsonic.com

Whatsapp: +008613530821762