How to maintain the ultrasonic vibrating screen?
Time:05/13/2024    Views:1  
1. Daily cleaning:

After daily use, the equipment should be cleaned, especially the sieve section. Remove material residues and debris to avoid affecting the next use effect.

During the cleaning process, the power must be turned off to avoid danger.

Clean the screen with clean water or a specialized cleaning solution, and do not use hard objects (such as wire brushes) to scrape the screen to prevent damage.

2. Inspection and replacement:

Regularly inspect the screen, springs, brackets, and other components for damage or looseness. If there are any problems, they should be repaired and replaced in a timely manner.

Check if the wiring of the electrical equipment is normal and if the motor is working properly.

Check the operation of the ultrasonic generator to ensure its normal operation.

3. Lubrication and maintenance:

Regularly inspect the lubrication of various components of the equipment and add or replace lubricating oil in a timely manner.

Regularly check whether the fasteners in various parts of the equipment are loose, and if there is any looseness, tighten them in a timely manner.

4. Screen cleaning and replacement:

After using the ultrasonic vibrating screen for a certain period of time, it is necessary to clean the screen mesh and regularly replace the screen mesh to prevent blockage and reduce screening efficiency.

5. Safe operation:

During the operation, ensure to wear appropriate personal protective equipment, such as safety glasses, gloves, and earplugs. The vibration frequency of ultrasonic vibrating screens may generate noise and vibration, therefore appropriate safety measures need to be taken.

Follow the operating manual and usage instructions of the equipment to ensure understanding and familiarity with the correct operating methods of the equipment.

Do not put materials with high pressure into the ultrasonic vibrating screen to avoid equipment blockage and malfunction.

The pipelines and joints for conveying materials must be kept unobstructed to avoid jamming.

If any malfunctions or abnormal conditions are found in the equipment, it must be immediately shut down and taken offline for maintenance.

6. Regular maintenance:

According to the requirements of the equipment user manual, perform regular equipment maintenance, including replacing vulnerable parts, inspecting electrical systems, etc.

You Are Deeply interested in related news

Copyright © 2024  Jiayuanda Technology   All Rights Reserved