The principle of 　　 ultrasonic rubber cutting machine is to convert 50/60 Hz electric current into 20, 30 or 40 kHz electric energy through an ultrasonic generator. The converted high-frequency electric energy is then converted into mechanical vibration of the same frequency by the transducer, and then the mechanical vibration is transmitted to the cutting blade through a set of amplitude modulation device that can change the amplitude. The ultrasonic rubber cutting blade vibrates along its length with an amplitude of 10-70μm and repeats 40,000 times/s (40 kHz) (the vibration of the blade is very small, and it is generally difficult to see with the naked eye). Then the cutting blade transfers the received vibration energy to the cutting surface of the workpiece to be cut, and the vibration energy of the workpiece to be cut is cut by activating the molecular energy of the rubber molecules and opening the molecular chain.

Product advantages:

1. High stability: When the ultrasonic generator is working, electromagnetic vibration is generated, which is converted into mechanical vibration and transmitted to the cutter and cutting material. Mechanical cutting is used, no sharp cutting edges are required, the blade wear is small, and the cutter head can be replaced by itself.

2. Safety and environmental protection: When the ultrasonic knife is cutting, the temperature of the knife head is lower than 50 degrees Celsius, no smoke and odor will be produced, and the danger of injury and fire during cutting is eliminated.

3. The cutting is neat: because the ultrasonic is cut by high-frequency vibration, the material will not adhere to the surface of the blade, and the cutting only needs a small pressure. The fragile and soft materials are not deformed or worn, and the fabric is cut and automatically Sealed. Will not cause chips.

4. Simple operation: the cutter is connected to the ultrasonic generator, the ultrasonic generator is connected to the 220V power supply, the switch can cut, and it supports handheld and machine-mounted cutting.