Ultrasonic mask welding machine is a kind of equipment used in mask making process. Ultrasonic mask welding machine does not need to install ventilation equipment to emit smoke and heat, because ultrasonic itself is a smokeless and ventilated welding method, so it is more convenient than those traditional welding methods before, and the cooling speed is fast, there is no smoke in the process of operation. High work efficiency, low cost, has been the biggest reason for these enterprises to use ultrasonic welding, not only is to save materials, but also in this aspect of production efficiency has been greatly improved.

It should be noted that the operation should also be carried out in accordance with a certain process, otherwise it will be easy to equipment failure and affect the work efficiency.

The operation process of ultrasonic mask welding machine is as follows:
1. Before using ultrasonic mask welding machine, we must carry out overhaul of the machine. Before starting the equipment to overhaul, welding machine after maintenance, need to turn on the power.

2. After turning on the power of the ultrasonic mask welding machine, if anything goes wrong when using it, the indicator light of the equipment will light up. At this time, it is necessary to basically adjust the production capacity of the machine.

3, the use of this equipment for some reasons in the output fault indicator light, if lit up will produce some over-current protection, this time to turn off. Then turn the adjusting knob counterclockwise to reduce the current and turn it on again.
4. When the transducer of the ultrasonic mask welding machine is empty, we must not develop the motor for a long time, otherwise it is easy to generate heat and will damage the transducer.
5. When the ultrasonic mask welding machine is used for normal welding, clamp the welded workpiece tightly and step on the welding fixture to weld.
6, adjust the welding time button, clockwise rotation, is to increase the welding time. Counterclockwise adjustment is to reduce the welding time.
7, power, time pressure these three factors are important welding system of different specifications of the workpiece, the power they need is not the same, so also according to the specification of the workpiece to set.