Contact sales@jydultrasonicmachine.com

Introduction of ultrasonic metal welding machine
Time:03/18/2023    Views:1  

We are the manufacturer and seller of ultrasonic metal welding machines. We have 14 years of research and development experience in ultrasonic metal welding machines. Next, we will introduce Jiayuanda's ultrasonic metal welding machines to you.

 

Jiayuanda has three types of ultrasonic metal welding machines--JYD-L20, JYD-L20-XS and JYD-L40.

 

JYD-L20 is a 20khz, 3000W ultrasonic metal welding machine. Its tool heads are diverse, and ultrasonic welding heads are made of special materials, which are wear-resistant and have a HRC of up to 65 degrees; The welding material does not melt and has no fragile metal properties. After welding, the material has good electrical conductivity and extremely low or near zero resistance coefficient.

 

JYD-L20-XS is a wire ultrasonic welding machine, whose performance is similar to L20. It is used for welding metal wire, harness, terminal, cable, plug.

 

JYD-L40 is a ultrasonic metal spot welding machine. Its frequency is 40kh, and the power is 1200W. It has low requirements for welding metal surfaces, and can be welded by oxidation or electroplating. It has a short welding time and does not require any flux, gas, or solder. It has no spark during welding, which is environmentally safe. The ultrasonic delay time, welding time, and curing time are 0.01-9.99SEC.

 

If you are interested in our product, please contact us.

You Are Deeply interested in related news

Copyright © 2024  Jiayuanda Technology   All Rights Reserved