The material of the slide is easily broken and afraid of vibration. The slide is usually cleaned using traditional manual cleaning methods, such as water or alcohol cleaning. During the cleaning process, fingers may inevitably come into contact with the slide, leaving behind some invisible dirt and particles such as fingerprints and imprints. This undoubtedly poses a hidden danger to the next step of laboratory work and seriously affects the effectiveness of use, The traditional hand washing cleaning method cannot achieve the ideal cleanliness of the laboratory, so the traditional cleaning method cannot completely clean the adhered dirt on the slide. As a high-tech product, the slide ultrasonic cleaning machine can make the slide clean more thoroughly, emulsify and peel off the dirt on the surface of the slide, promote the next step of the laboratory work, and greatly improve the product yield.

The slide ultrasonic cleaning machine is cleaned through physical cleaning methods using cavitation effect, so its working principle is that the high-frequency oscillation signal emitted by the ultrasonic generator is transmitted to the medium cleaning solution through high-frequency mechanical vibration replaced by a transducer, generating tens of thousands of small bubbles. Under the action of ultrasound, the small bubbles continuously close and expand, continuously producing a series of small bubbles, Continuously impacting the surface of the glass slide, causing the dirt on the surface and gaps of the slide to quickly peel off and peel off.

The slide can be cleaned using ultrasound, and the reason for choosing ultrasound to clean the slide is environmental protection, safety, good cleaning effect, no damage to the slide, and no impact on laboratory experimental observation. Therefore, the ultrasonic cleaning machine for glass slides has become the only cleaning method that can meet its special cleaning technology requirements. Below is an explanation of the cleaning method and requirements for downloading glass slides:

During the ultrasonic cleaning process, it is necessary to add slide cleaning agent. Ultrasound belongs to physical action, while slide cleaning agent belongs to chemical action. The combination of the two will achieve a more effective cleaning effect, just like washing dishes requires the addition of detergent.

The specific cleaning method is as follows:

Firstly, place the used glass slide into the cleaning tank of the ultrasonic cleaning machine, add water and an appropriate amount of glass slide cleaning agent, and then activate the ultrasonic switch to adjust the appropriate temperature and time. During the cleaning process, some dirt such as dye and cedar oil slowly dissolve into the cleaning agent water. Take out the cleaning agent that rinses the surface with clean water. At this time, the glass slide has been smooth and clean as new. If there are any handwriting on the surface, it can be removed in alcohol.