Ultrasonic cutting through ultrasonic action to make the grinding wheel blade in the radius direction of instant telescopic vibration, can in a very short time, so that the abrasive particles and processed objects in a high acceleration state repeatedly collision.
Ultrasonic cutting is a kind of ultrasonic equipment specially used for cutting, is one of the important categories of ultrasonic application.

Ultrasonic cutting features, do not need a sharp blade, do not need a lot of pressure, will not cut the edge of the material, damage. The cutting knife is doing ultrasonic vibration, friction resistance is particularly small, the cutting material is not easy to stick to the blade. It has obvious cutting effect on frozen, viscous and elastic materials. Such as food, rubber or inconvenient to pressure cutting objects, especially effective. At the same time of cutting, the cutting part has fusion effect. The cutting area is well sealed to prevent loose organization of the material being cut (e.g., textile material flapping). The use of ultrasonic cutting machine can also be extended, such as digging, digging, scraping, carving, slitting and so on.

Ultrasonic cutting machine is composed of ultrasonic transducer, ultrasonic horn, ultrasonic cutting knife, ultrasonic generator.
1, ultrasonic generator
The mains is converted into high frequency and high voltage AC current, which is fed to an ultrasonic transducer. Ultrasonic transducer is equivalent to an energy conversion device, which can convert the input electrical energy into mechanical energy, namely ultrasonic wave. The ultrasonic transducer is stretched back and forth in the longitudinal direction, and the frequency of the stretching movement is equal to the frequency of the high frequency AC current provided by the driving power supply.
2, ultrasonic horn
Ultrasonic horn amplifies the output amplitude of ultrasonic transducer.
3, cutting knife

Further amplifies the amplitude and focuses the ultrasound. Ultrasonic output, the use of the cutting knife will be concentrated ultrasonic energy input to the cutting part of the material to be cut. Under the action of huge ultrasonic energy, the part instantly softens and melts, and the strength decreases greatly. Cutting material can be achieved by applying very little force.