Ultrasonic cutting is the use of ultrasonic energy, will be cut material local heating melting, to achieve the purpose of cutting, so no sharp edge. Commonly used for cutting difficult to cut materials, such as thermoplastic resin boards, sheets, films and laminates, carbon fiber composites, fabrics and rubber, etc.

Traditional cutting
Need sharp edge, increase the requirement of blade;
Cloth cutting can not edge sealing, cutting edge easily cause edge collapse and damage;
Sticky objects are difficult to cut, easy to stick the knife, affecting the cutting effect and efficiency;
Cutting the need to exert pressure on the object, easy to make soft or fragile food deformation;
Some items in the cutting will produce a large number of broken particles and debris, increase waste.

Advantages of ultrasonic cutting
High stability: the ultrasonic generator generates 40KHz electromagnetic vibration when working, which is transformed into mechanical oscillation and transmitted to the cutting knife and cutting material. Mechanical cutting, so no sharp edge is needed, the blade wear is small, and the tool head can be replaced by itself.
No pollution: when the ultrasonic knife cutting, the temperature of the knife head is lower than 50℃, will not produce smoke and odor, eliminate the danger of injury and fire when cutting.
Clean cutting: because ultrasonic cutting through high frequency vibration, the material will not adhere to the surface of the blade, cutting only small pressure, for fragile and soft materials are not deformed and wear, fabric cutting at the same time automatic edge sealing, will not cause edge collapse.
Simple operation: the cutting knife is connected to the ultrasonic generator, which is connected to 220V mains power, and can be cut by opening the switch. It supports hand-held cutting and is equipped with air cooling interface.

Wide range of applications: all kinds of textile materials and plastic sheets can be cut by ultrasonic, such as natural fibers, synthetic fibers, non-woven fabrics and knitted fabrics can be cut by ultrasonic.